Part Number Hot Search : 
AD825 DO1605T AH892 GDZ20D 2SB1492 LL5230B BD989 TDA726
Product Description
Full Text Search
 

To Download NJU6214 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 NJU6214 Series
Small-Sized 1.8V Operating Voltage Fundamental Quartz Crystal Oscillator IC
!GENERAL DESCRIPTION The NJU6214 series is a C-MOS quartz crystal oscillator IC realized excellent frequency stability for fundamental (up to 60MHz) oscillation, and consists of an oscillation amplifier, 4-stage divider, 3-state output buffer and a built-in LDO. The operating voltage is from 1.62V to 3.63V, and the LDO holds down the characteristic change of the oscillation amplifier for operating voltage variation, and has been stabilized oscillation frequency. The 4-stage divider generates only one frequency selected of f0,f0/2,f0/4 f0/8 and f0/16 internal circuits is output. The 3-state output buffer is C-MOS compatible of high fan-out. The oscillation stopping current is very low stand-by mode below 1uA, therefore, it is suitable for the portable items of the communication equipment and the like. The pad arranges "L" location to be easy to put on 2016 size oscillator by wire bonding. !FEATURES "Frequency Stability 1ppm@VDD10% "Operating Voltage 1.62 to 3.63V "Maximum Oscillation Frequency Up to 60MHz "Low Operating Current 5mA typ.@60MHz/3.3V/15pF "4-Stage Divider Maximum Divider f0/16 "Built-in LDO "Oscillation Stop and Output Stand-by Function "3-State Output Buffer "Variable Pull-up Resistance on-Die "Oscillation Capacitors Cg and Cg on-Die "Package Outline Die/Wafer "C-MOS Technology !LINE-UP TABLE Type No. FOUT Internal Connect Short Open N A B B A 2 B A 4 B A 8 B A 16 Cg/Cd 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF 9.3/10.7pF !PACKAGE OUTLINE
NJU6214XC-X
!PAD LOCATION Die VDD VSS FOUT XTI XTO CONT
!COORDINATES No Pad Name X Y 1 CONT -189 231 2 XTI -189 77 3 XTO -189 -77 4 VSS -189 -231 5 FOUT 215 -231 6 VDD 222 231 Starting Point: Die Center Unit[um] Die Size: 0.64x0.60mm Die Thickness (C-V): 13010um Die Thickness (C-L): 14010um Wafer Thickness (W-V): 13010um Wafer Thickness (W-L): 14010um Pad size: 70x70um Die Substrate: VSS level
A f0 B f0/2 f0/4 NJU6214 C D f0/8 *E f0/16 * Under Development
!EXAMPLE OF PART NUMBER 1)NJU6214AW-L FOUT=f0, Wafer Thickness=140um 2)NJU6214CC-V FOUT= f0/4, Die Thickness=130um
2010/04/27 ( 1 / 7 )
NJU6214 Series
!BLOCK DIAGRAM VDD Regulator VSS
XTO
Rf
XTI
Level Shifter Cg Cd A
1/N Divider B 3-State Buffer
FOUT
OSC Detector
CONT
!TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control CONT FOUT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4,f0/8 and f0/16 Note1) L Oscillation Stop and High impedance Output XTI Quartz Crystal Connecting Terminals XTO VSS VSS=0V : GND FOUT Frequency Output VDD VDD=1.62 to 3.63V Note1) Refer to the line-up table. !ABSOLUTE MAXIMUM RATINGS (VSS=0V, Ta=25C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN -0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA 10 Output Current IO mA 25 Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit.
2010/04/27 ( 2 / 7 )
NJU6214 Series
!ELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage Output Frequency Stability SYMBOL VDD df/f CONDITIONS fosc=60MHz VDD10% MIN 1.62 TYP 1 MAX 3.63 (Ta=25C) UNIT V ppm
PARAMETER
SYMBOL
Operating Current
IDD
CONDITIONS A version, f0=60MHz, CL=15pF B version, f0/2=30MHz, CL=15pF C version, f0/4=15MHz, CL=15pF D version, f0/8=7.5MHz, CL=15pF *E version, f0/16=3.75MHz, CL=15pF CONT=VSS, No load
MIN
(VDD=1.8V,Ta=+25C) TYP MAX UNIT 3.0 4.0 1.8 2.6 mA 1.3 2.0 1.0 2.0 0.9 2.0 1 uA V V V V uA uA 1.8 0.54 0.18 2.7 0.25
Oscillation Stopping Current Input Voltage Output Voltage Input Current
ISTB VIH VIL VOH VOL IIN
IOH=2mA IOL=2mA CONT=0.8VDD CONT=0.2VDD
1.26 0 1.62 1.9 0.1
3-state Off Leakage IOZ CONT=VSS, FOUT= VDD or VSS 0.1 uA Current Feedback Resistance Rf 270 k Internal Capacitor Cg fosc=60MHz 9.3 pF Internal Capacitor Cd fosc=60MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 60 MHz Output Signal 45 50 55 % SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise 3.2 5.0 ns tr CL=15pF, 0.1VDD to 0.9VDD Time Output Signal Fall 3.2 5.0 ns tf CL=15pF, 0.9VDD to 0.1VDD Time Output Disable time TPOZ CL=15pF, RL=1k 100 ns Output Enable Time TPZO CL=15pF 1 ms Note4) The oscillation frequency range has used NJRC's standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) * Under Development.
2010/04/27 ( 3 / 7 )
NJU6214 Series
(VDD=2.5V,Ta=+25C) TYP MAX UNIT 3.7 5.0 2.4 3.3 mA 1.6 2.4 1.2 2.0 1.0 2.0 1 1.75 0 2.25 4.2 0.3 2.5 0.75 0.25 9.0 0.6 uA V V V V uA uA
PARAMETER
SYMBOL
Operating Current
IDD
CONDITIONS A version, f0=60MHz, CL=15pF B version, f0/2=30MHz, CL=15pF C version, f0/4=15MHz, CL=15pF D version, f0/8=7.5MHz, CL=15pF *E version, f0/16=3.75MHz, CL=15pF CONT=VSS, No load
MIN
Oscillation Stopping Current Input Voltage Output Voltage Input Current
ISTB VIH VIL VOH VOL IIN
IOH=4mA IOL=4mA CONT=0.8VDD CONT=0.2VDD
3-state Off Leakage CONT=VSS, FOUT= VDD or VSS 0.1 uA IOZ Current Feedback Resistance Rf 270 k Internal Capacitor Cg fosc=60MHz 9.3 pF Internal Capacitor Cd fosc=60MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 60 MHz Output Signal 45 50 55 % SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise tr CL=15pF, 0.1VDD to 0.9VDD 2.2 3.7 ns Time Output Signal Fall 2.2 3.7 ns tf CL=15pF, 0.9VDD to 0.1VDD Time Output Disable time TPOZ CL=15pF, RL=1k 100 ns Output Enable Time TPZO CL=15pF 1 ms Note4) The oscillation frequency range has used NJRC's standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) * Under Development.
2010/04/27 ( 4 / 7 )
NJU6214 Series
PARAMETER SYMBOL CONDITIONS A version, f0=60MHz, CL=15pF B version, f0/2=30MHz, CL=15pF C version, f0/4=15MHz, CL=15pF D version, f0/8=7.5MHz, CL=15pF *E version, f0/16=3.75MHz, CL=15pF CONT=VSS, No load 2.31 0 2.97 7.8 0.6 MIN (VDD=3.3V,Ta=+25C) TYP MAX UNIT 5.0 7.0 3.2 4.4 mA 2.2 3.0 1.7 2.5 1.5 2.3 10 3.3 0.99 0.33 16.0 1.2 uA V V V V uA uA
Operating Current
IDD
Oscillation Stopping Current Input Voltage Output Voltage Input Current
ISTB VIH VIL VOH VOL IIN
IOH=6mA IOL=6mA CONT=0.8VDD CONT=0.2VDD
3-state Off Leakage IOZ CONT=VSS, FOUT= VDD or VSS 0.1 uA Current Feedback Resistance Rf 270 k Internal Capacitor Cg fosc=60MHz 9.3 pF Internal Capacitor Cd fosc=60MHz 10.7 pF Oscillation Frequency fosc Recommendation Note4) 60 MHz Output Signal 45 50 55 % SYM CL=15pF, @VDD/2 Symmetry Output Signal Rise 1.8 3.0 ns tr CL=15pF, 0.1VDD to 0.9VDD Time Output Signal Fall 1.8 3.0 ns tf CL=15pF, 0.9VDD to 0.1VDD Time Output Disable time TPOZ CL=15pF, RL=1k 100 ns Output Enable Time TPZO CL=15pF 1 ms Note4) The oscillation frequency range has used NJRC's standard crystal for measurement. However it is not guaranteed. (Refer to EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS) * Under Development.
2010/04/27 ( 5 / 7 )
NJU6214 Series
!EXAMPLE OF CRYSTAL PARAMETERS FOR MEASUREMENT CIRCUITS
L1
C1
R1
f[MHz] 60
C0
R1[] 31.2
L1[mH] 3.75
C1[fF] 1.87
C0[pF] 0.92
!MEASUREMENT CIRCUITS (1)Operating Current, Output Signal Symmetry, Output Signal Rise/Fall Time (CL=15pF)
1/2VDD
VDD XTI XTO VSS FOUT 0.1uF CL=15pF
H
L
90% 50% 10% tr tf
(2)Output Disable Time (CL=15pF,RL=1k)
XTI XTO Pulse Generator 50
VDD FOUT 0.1uF
RL=1k
CONT
0.2VDD TPOZ
CONTV SS
CL=15pF FOUT
VOL
(3)Output Enable Time (CL=15pF)
Pulse Generator Pulse Generator 50
XTI XTO
VDD FOUT 0.1uF CL=15pF
CONT
0.8VDD TPZO
CONTV SS 50
FOUT
VOH
2010/04/27 ( 6 / 7 )
NJU6214 Series
2016 SIZE OSCILLATOR IMAGE DIAGRAM
NJU6214
[CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
2010/04/27 ( 7 / 7 )


▲Up To Search▲   

 
Price & Availability of NJU6214

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X